- 5 Resultados
precio mínimo: € 44,95, precio máximo: € 198,12, precio promedio: € 129,37
1
Structural Analysis of Printed Circuit Board Systems by Peter A. Engel Hardcover | Indigo Chapters
Pedir
por Indigo.ca
C$ 285,95
(aprox. € 198,12)
PedirEnlace patrocinado

Structural Analysis of Printed Circuit Board Systems by Peter A. Engel Hardcover | Indigo Chapters - libro nuevo

ISBN: 9780387979397

This book discusses the building blocks of electronic circuits - the microchips, transistors, resistors, condensers, and so forth, and the boards that support them - from the point of vie… Más…

new in stock. Gastos de envío:zzgl. Versandkosten., más gastos de envío
2
Structural Analysis of Printed Circuit Board Systems. - Engel, Peter A.
Pedir
por ZVAB.com
€ 44,95
Envío: € 2,901
PedirEnlace patrocinado

Engel, Peter A.:

Structural Analysis of Printed Circuit Board Systems. - encuadernado, tapa blanda

1993, ISBN: 0387979395

[EAN: 9780387979397], Gebraucht, sehr guter Zustand, [SC: 2.9], [PU: Springer], 291 Seiten; Das hier angebotene Buch stammt aus einer teilaufgelösten wissenschaftlichen Bibliothek und trä… Más…

NOT NEW BOOK. Gastos de envío: EUR 2.90 books4less (Versandantiquariat Petra Gros GmbH & Co. KG), Koblenz, Germany [1048006] [Rating: 5 (von 5)]
3
Structural Analysis of Printed Circuit Board Systems. - Engel, Peter A.
Pedir
por Achtung-Buecher.de
€ 47,90
Envío: € 0,001
PedirEnlace patrocinado
Engel, Peter A.:
Structural Analysis of Printed Circuit Board Systems. - encuadernado, tapa blanda

1993

ISBN: 0387979395

gebundene Ausgabe 291 Seiten; Gebundene Ausgabe Das hier angebotene Buch stammt aus einer teilaufgelösten wissenschaftlichen Bibliothek und trägt die entsprechenden Kennzeichnungen (Rück… Más…

Gastos de envío:Versandkostenfrei innerhalb der BRD. (EUR 0.00) Versandantiquariat Petra Gros GmbH & Co. KG, 56070 Koblenz
4
Structural Analysis of Printed Circuit Board Systems - Engel, Peter A.
Pedir
por Achtung-Buecher.de
€ 166,82
Envío: € 0,001
PedirEnlace patrocinado
Engel, Peter A.:
Structural Analysis of Printed Circuit Board Systems - encuadernado, tapa blanda

1993, ISBN: 0387979395

1993 Gebundene Ausgabe Klassische Mechanik, Elektronik, Sensor; deformation; elasticity; Fatigue; Interferometry; Material; modeling; structuralanalysis; testing; Transistor, mit Schutz… Más…

Gastos de envío:Versandkostenfrei innerhalb der BRD. (EUR 0.00) MARZIES.de Buch- und Medienhandel, 14621 Schönwalde-Glien
5
Structural Analysis of Printed Circuit Board Systems - Engel, Peter A.
Pedir
por Achtung-Buecher.de
€ 189,07
Envío: € 0,001
PedirEnlace patrocinado
Engel, Peter A.:
Structural Analysis of Printed Circuit Board Systems - encuadernado, tapa blanda

1993, ISBN: 0387979395

1993 Gebundene Ausgabe Klassische Mechanik, Elektronik, Sensor; deformation; elasticity; Fatigue; Interferometry; Material; modeling; structuralanalysis; testing; Transistor, mit Schutz… Más…

Gastos de envío:Versandkostenfrei innerhalb der BRD. (EUR 0.00) MARZIES.de Buch- und Medienhandel, 14621 Schönwalde-Glien

1Dado que algunas plataformas no nos comunican las condiciones de envío y éstas pueden depender del país de entrega, del precio de compra, del peso y tamaño del artículo, de una posible membresía a la plataforma, de una entrega directa por parte de la plataforma o a través de un tercero (Marketplace), etc., es posible que los gastos de envío indicados por eurolibro/terralibro no concuerden con los de la plataforma ofertante.

Datos bibliográficos del mejor libro coincidente

Detalles del libro
Structural Analysis of Printed Circuit Board Systems by Peter A. Engel Hardcover | Indigo Chapters

This book discusses the building blocks of electronic circuits - the microchips, transistors, resistors, condensers, and so forth, and the boards that support them - from the point of view of mechanics: What are the stresses that result from thermal expansion and contraction? What are the elastic parameters that determine whether a component will survive a certain acceleration? After an introduction to the elements of structural analysis and finite-element analysis, the author turns to components, data and testing. A discussion of leadless chip carriers leads to a detailed thermal analysis of pin grid arrays. For compliant leaded systems, both mechanical (bending and twisting) and thermal stresses are discussed in detail. The book concludes with discussions of the dynamic response of circuit cards, plated holes in cards and boards, and the final assembly of cards and boards.

Detalles del libro - Structural Analysis of Printed Circuit Board Systems by Peter A. Engel Hardcover | Indigo Chapters


EAN (ISBN-13): 9780387979397
ISBN (ISBN-10): 0387979395
Tapa dura
Tapa blanda
Año de publicación: 1993
Editorial: Peter A. Engel
316 Páginas
Peso: 0,637 kg
Idioma: eng/Englisch

Libro en la base de datos desde 2007-01-27T03:14:37-06:00 (Mexico City)
Página de detalles modificada por última vez el 2023-09-13T08:40:40-06:00 (Mexico City)
ISBN/EAN: 9780387979397

ISBN - escritura alterna:
0-387-97939-5, 978-0-387-97939-7
Mode alterno de escritura y términos de búsqueda relacionados:
Autor del libro: peter engel, engels peter
Título del libro: circuit analysis, structural systems, around the circuit, system board


Datos del la editorial

Autor: Peter A. Engel
Título: Mechanical Engineering Series; Structural Analysis of Printed Circuit Board Systems
Editorial: Springer; Springer US
291 Páginas
Año de publicación: 1993-06-24
New York; NY; US
Idioma: Inglés
160,49 € (DE)
164,99 € (AT)
177,00 CHF (CH)
Available
XIX, 291 p.

BB; Hardcover, Softcover / Physik, Astronomie/Mechanik, Akustik; Klassische Mechanik; Verstehen; Sensor; deformation; elasticity; fatigue; interferometry; material; modeling; structural analysis; testing; transistor; Classical Mechanics; Characterization and Analytical Technique; Electronics and Microelectronics, Instrumentation; Werkstoffprüfung; Elektronik; BC

1. Elements of Structural Analysis.- 1. Rods.- 2. Beams.- 3. Plates.- 4. Thermal Stress.- 5. Plastic Beam Deformation.- 6. Energy Methods in Structural Analysis.- 7. Experimental Methods of Analysis.- References.- 2. Finite Element Analysis.- 1. Preliminaries.- 2. Direct Stiffness Matrix Approach.- 3. The Principle of Minimum Potential Energy.- 4. Element Types.- 5. Finite Element Dynamic Analysis.- 6. Stress and Strain Calculations.- 7. Structural Codes.- 8. Steps in the Use of Finite Element Analysis.- References.- 3. Components, Data, and Testing.- 1. Modules.- 2. Circuit Cards and Boards.- 3. Pin Leads of PGA Modules.- 4. Strength of Compliant Leads in Surface-Mount Construction.- 5. Stiffness of Compliant Leads.- 6. Solder Strength.- References.- 4. Leadless Chip Carriers.- 1. Loads and Materials.- 2. Thermal Stress Analysis.- 3. The Influence of Solder Joint Shape.- 4. Constitutive Equation for Solder Mount.- 5. Conclusions.- 6. Exercises and Questions.- References.- 5. Thermal Stress in Pin-Grid Arrays: Primary Analysis of Pins.- 1. Introduction.- 2. Elastic Foundation Modulus of a Soldered Pin.- 3. Elastic Foundation Treatment for the Embedded Pin.- 4. Solder Pressure Calculation.- 5. Plastic Analysis of the Pin.- 6. Axial Pin Force Due to Flexure.- 7. A Magnified-Scale Experiment.- 8. Conclusions.- 9. Exercises and Questions.- References.- 6. Thermal Stress in Pin-Grid Arrays: Interaction Between Module and Circuit Card.- 1. Pin Force Analysis Due to Module and Card Bending.- 2. Influence of Pin-End Moments.- 3. Influence of the Primary Axial Pin Forces.- 4. Influence of Secondary Axial Pin Forces.- 5. Solution of the System of Equations.- 6. Module and Card Stretch Due to Pin Shear.- 7. System Reduction Factor.- 8. Conclusions.- 9. Exercises and Questions.- References.- 7. Compliant Leaded Systems: The Local Assembly.- 1. Experimental Studies.- 2. Analytical Model.- 3. Properties of Simple Local Assemblies.- 4. Discrete Local Assembly.- 5. Built-up (Multiple-Module) Local Assemblies.- 6. Orthotropy of Local Assemblies.- 7. Module Group Assemblies.- 8. Conclusions.- 9. Exercises and Questions.- References.- 8. Bending in Compliant Leaded Systems.- 1. The Role of Leads.- 2. Application of the Finite Element Method.- 3. Strip Method.- 4. Building Block Method.- 5. Hybrid Experimental/Analytical Method.- 6. Conclusions.- 7. Exercises and Questions.- References.- 9. Approximate Engineering Theory for the Twisting of Compliant Leaded Circuit Card/Module Systems.- 1. Fundamental Approach.- 2. Torsional Stiffness Calculation.- 3. Rectangular Cards with a Module.- 4. Module Clusters.- 5. Finite Element Check of the Approximate Theory.- 6. Conclusions.- 7. Exercises and Questions.- References.- 10. Analytical Theory and Experimental Work in Compliant Leaded Systems Subjected to Twisting.- 1. Analytical Theory.- 2. Torsional Stiffness.- 3. Experimental Study.- 4. Large Displacements.- 5. Approximate Large Displacement Analysis of a Square Card.- 6. Torsional Fatigue.- 7. Conclusions.- 8. Exercises and Questions.- References.- 11. Thermal Stresses in Compliant Leaded Systems.- 1. Motivation for Analysis.- 2. Analytical Lead Stress Computation.- 3. Finite Element Thermal Stress Analysis.- 4. Stress Reduction in Compliant Leaded Solder Joints.- 5. Thermal Fatigue in Solder Joints of Compliant Leads.- 6. Thermal Cycling Reliability.- 7. Exercises and Questions.- References.- 12. Dynamic Response of Circuit Card Systems.- 1. General Considerations.- 2. Dynamic Load Levels and Measurement.- 3. Vibration Analysis in Circuit Card Systems.- 4.Transient Vibration and Shock Response.- 5. Fatigue Considerations.- 6. Conclusions.- 7. Exercises and Questions.- References.- 13. Plated Holes in Cards and Boards.- 1. Introduction.- 2. Thermal Stress from Module-to-Card Mismatch.- 3. Thermal Stress from Barrel-to-Board Mismatch.- 4. Experimental Methods.- 5. Vias.- 6. Conclusions.- 7. Exercises and Questions.- References.- 14. Assembly of Cards and Boards.- 1. Physical Description.- 2. ZIF Connector Actuation.- 3. Connector Contact.- 4. Dynamic Response.- 5. Thermal Stress.- 6. A Combined Permanent and Separable Connector System.- 7. Conclusions.- 8. Exercises and Questions.- References.- Author Index.

< para archivar...